Transport layer MCQ
Transport Layer MCQ-Objective questions for Gate and Other exams
Q1. In computer network Transport layer provides..
(a) Hop to Hop Delivery
(b) Host to Host Delivery
(c) Process to Process Delivery
(d) None
Answer (c) Process to Process Delivery
Q2. Transport layer provides..
(a) Hop to Hop connection
(b) Host to Host connection
(c) End to End connection
(d) None
Answer (c) End to End connection
Q3. Which of the following is not a responsibility of Transport layer…
(a) Flow control
(b) Congestion Control
(c) Multiplexing and Demultiplexing
(d) Hop to Hop Packet delivery
Answer (d) Hop to Hop Packet delivery
Q4. Which of the following is not a Protocol of Transport layer…
(a) TCP/IP
(b) UDP
(c) DHCP
(d) None
Answer (c) DHCP
Q5. To avoid Packet drop on network Transport layer uses…
(a) Flow control
(b) Congestion Control
(c) Multiplexing and Demultiplexing
(d) Hop to Hop Packet delivery
Answer (b) Congestion Control
Q6. Transport layer takes services from…
(a) Application Layer
(b) Network Layer
(c) Data Link Layer
(d) Physical Layer
Answer (a) Application Layer
Q7. Transport layer Passes services to…
(a) Application Layer
(b) Network Layer
(c) Data Link Layer
(d) Physical Layer
Answer (b) Network Layer
Q8. By using……………….. we can Identify a Process on Transport layer
(a) Port Number
(b) IP address
(c) Physical address
(d) None
Answer (a) Port Number
Q9. Size of Port Number Field at Transport layer
(a) 32bit
(b) 8bit
(c) 64bit
(d) 16bit
Answer (d) 16bit
Q10. TCP is a…
(a) Byte Oriented Protocol
(b) bit Oriented Protocol
(c) Connection Oriented Protocol
(d) Both a and c
Answer (d) Both a and c
Also Solve : TCP MCQs all Objective questions
Transport Layer MCQ
Q11. Which one of the below is reliable Protocol…
(a) TCP
(b) UDP
(c) Bootp
(d) ARP
Answer (a) TCP
Q12. What is full form of UDP in computer network…
(a) User Data Protocol
(b) Use device Protocol
(c) User Datagram Protocol
(d) None
Answer (c) User Datagram Protocol
Q13. What is full form of TCP in computer network…
(a) Transection Connection Protocol
(b) Transmission Control Protocol
(c) Transection connect Procedure
(d) None
Answer (b) Transmission Control Protocol
Q14. What is full form of TCP in computer network…
(a) Transection Connection Protocol
(b) Transmission Control Protocol
(c) Transection connect Procedure
(d) None
Answer (b) Transmission Control Protocol
Q15. Process to Process communication is possible in…
(a) TCP
(b) UDP
(c) Bootp
(d) Both a and b
Answer (d) Both a and b
Q16. Ports which are ranging from 0 to 1023 port number are called…
(a) Registered ports
(b) Well Known ports
(c) Client ports
(d) Server ports
Answer (b) Well Known ports
Q17. In computer network UDP Provides…
(a) Flow control
(b) Process to Process Delivery
(c) Error Control
(d) None of the above
Answer (b) Process to Process Delivery
Q18. Receiving Port number describe in UDP
(a) Receiver computer port number
(b) Receiver computer Process address
(c) Sending computer Process address
(d) None of the above
Answer (b) Receiver computer Process address
Q19. How many socket available in UDP
(a) two
(b) One
(c) Three
(d) Four
Answer (a) two
Q20. Byte stream segments are in
(a) TCP
(b) UDP
(c) Bootp
(d) Both a and b
Answer (a) TCP
Also Solve : TCP MCQs all Objective questions
Q21. Packets are called user datagram in…
(a) TCP
(b) UDP
(c) Bootp
(d) Both a and b
Answer (b) UDP
Q22. Size of UDP Header in network…
(a) 8bit
(b) 8 Byte
(c) 64Byte
(d) 16bit
Answer (b) 8 Byte
Q23. Three way hand shaking are used in…
(a) TCP
(b) UDP
(c) Bootp
(d) Both a and b
Answer (a) TCP
Q24. TCP used………………… method to send segments
(a) Connection oriented
(b) Connectionless
(c) Datagram Switching
(d) Both a and b
Answer (a) Connection oriented
Q25. TCP Byte stream packets are called
(a) User Datagram
(b) Frames
(c) Segments
(d) Packets
Answer (c) Segments
Q26. Which protocol is more reliable than others…
(a) TCP
(b) UDP
(c) Bootp
(d) Both a and b
Answer (a) TCP
Q27. In TCP how to check error free data on receiver side…
(a) Piggybacking
(b) Simple Switching
(c) Acknowledgement method
(d) Both a and c
Answer (d) Both a and c
Q28. Every byte of data in TCP has a…
(a) Port number
(b) Sequence number
(c) Acknowledgement number
(d) Both a and c
Answer (b) Sequence number
Q29. Every Sequence number in TCP starts with…
(a) 1
(b) 0
(c) Any sequence number
(d) Both a and c
Answer (c) Any sequence number
Q30. In TCP every Sequence number in each segment assign to……………byte(virtual byte) of segment
(a) First
(b) Last
(c) Second
(d) Both a and c
Answer (a) First
Also Solve : TCP MCQs all Objective questions
Q31.TCP communication mode is…
(a) Full Duplex
(b) Simplex
(c) Half Duplex
(d) Both a and c
Answer (a) Full Duplex
Q32. In TCP sequence number that Receiver wants in the form of acknowledgement is…
(a) Next sequence number
(b) First sequence number
(c) Last sequence number
(d) Both a and c
Answer (a) Next sequence number
Q33. Calculation of checksum in TCP on transport layer is…
(a) Optional
(b) Mandatory
(c) Only for Header
(d) Both a and c
Answer (b) Mandatory
Q34. In Transport layer TCP protocol SYN flag consume………………..Sequence number .
(a) One
(b) Two
(c) Three
(d) None
Answer (a) One
Q35. In Transport layer TCP protocol SYN and ACK flag consume………………..Sequence number .
(a) One
(b) Two
(c) Three
(d) None
Answer (b) Two
Q36. In Transport layer TCP protocol if Acknowledgement not carry any data than ACK flag consume………………..Sequence number .
(a) One
(b) Two
(c) Three
(d) None
Answer (a) One
Q37. In Transport layer three way hand shaking procedure TCP protocol FIN flag consume………………..Sequence number .
(a) One
(b) Two
(c) Three
(d) None
Answer (a) One
Q38. In connection termination phase of TCP protocol FIN+ACK flag consume………………..Sequence number if no data is carry by acknowledgement.
(a) One
(b) Two
(c) Three
(d) None
Answer (a) One
Q39. A connection termination condition of TCP three way hand shaking method when sender close connection but receiver continuously send data to sender is called .
(a) Simplex mode
(b) Half Close
(c) Full Duplex
(d) None
Answer (b) Half Close
Q40. Flow control technique that TCP use in computer network are called..
(a) Sliding Window
(b) Go back n
(c) Selective repeat
(d) a, b and c
Answer (b) Half Close
About the Author
3 thoughts on “Transport Layer MCQ-Objective questions for Gate”